CERT Silicon Carbide Thermocouple Protection Tubes

Material

Various standard types:

TypeLength mm / inch
CERT-212 / -312305 mm / 12″
CERT-218 / -318460 mm / 18″
CERT-220 / -320508 mm / 20″
CERT-222 / -322559 mm / 22″
CERT-224 / -324610 mm / 24″
CERT-230 / -330760 mm / 30″
CERT-236 / -336915 mm / 36″
CERT-242 / -3421065 mm / 42″
CERT-248 / -3481220 mm / 48″
CERT-254 / -3541370 mm / 54″
CERT-M70700 mm
CERT-M80800 mm
CERT-M10001000 mm

Application:

Aluminium, Brass

Max. Temperature: up to 1.000 °C

Aansluiting:
standard ½” / 16 mm BSP outside thread (2..-series, e.g. CERT-248)
also available with ¾” / 21 mm BSP outside thread (3..-series, e.g. CERT-348)

Types:
CERT-2(+length in inch)
CERT-3(+length in inch)

Safety and Best Practice:

TPTs from any source should never be immersed in molten aluminium or other metals unless they have been previously dried at above 100º C to remove any water that may have been accidentally spilled on them. This is also applicable to other fluids such as oil, suspending liquids for wash coatings etc. In the latter case the tubes must be heated to a temperature sufficient to remove them. It is considered best practice to keep the thermocouples in a warm dry storage area. Our SiC tubes do NOT require additional coating.

Contact

SRS AMSTERDAM bv

Dusartstraat 23
1072 HM Amsterdam
Netherlands

Tel: +31-(0)20-6935209
Fax: +31-(0)20-6935762